3111 Front Axle Carrier
31 11 FRONT SUBFRAME - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Front axle support, front to body | F54/F55/F56/F57/F60 | M12 Replace screws. |
Tightening torque | 108 Nm |
| 2AZ Rear end of front axle support to body | F54/F55/F56/F57/F60 | M14 Replace screws. |
Tightening torque | 175 Nm |
| 3AZ Adapter, front axle support to front axle support | F54/F55/F56/F57/F60 | Tightening torque | 100 Nm | |
| 4AZ Thrust field to front axle | F57 | Replace screws. | 1. Tightening torque | 56 Nm |
| 2. Angle of rotation | 90° | |||
| 5AZ Thrust field to bumper cover/support | F57 | Tightening torque | 3 Nm | |
| 6AZ Torsion strut to front axle/body, middle | F57 | 1. Tightening torque | 56 Nm | |
| 2. Angle of rotation | 90° | |||
| 7AZ Torsion strut to side member | F57 | 1. Tightening torque | 100 Nm | |
| 2. Angle of rotation | 70° | |||
| 8AZ Cross-member on front subframe | F54 | 1. Tightening torque | 56 Nm | |
| 2. Angle of rotation | 45° |
3111 TIGHTENING TORQUE OVERVIEW
| Ride height sensor holder to front axle support | ||
| M6 | Tightening torque | 8 Nm |