65 82 300 Removing and installing (replacing) Touchbox controller control unit - V.1 (Countryman 2017-2023, except PHEV)

Preliminary work needed: 

• Remove COVER ON C-PILLAR AT BOTTOM .

Removal: 

Unscrew the screws (1).

Disconnect plug connection (2).

Remove control unit (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Position control unit (3).

Connect plug connection (2).

Tighten down screws (1).

Tightening torque 65 82 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install TRIM FOR C-PILLAR AT BOTTOM .

Replacement: 

Perform the PROGRAMMING/CODING .