66 33 008 Removing and installing/replacing park assist control unit (Countryman 2017-2023, except PHEV)

Removal:

Open the flap (1) in the right luggage compartment wheel arch panel (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock the holder (1) on the bottom on the lug (2).

Remove the holder (1) from the guides (3) toward the bottom.

Feed out holder (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Detach the control unit (2) at the detents (3) and pull it out of the holder.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert the control unit (2) into the holder and engage it at the detents (3).

Connect and lock plug connection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Feed in holder (1).

Slide the holder (1) into the guides (3) toward the top.

Engage the holder (1) on the bottom on the lug (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Insert flap (1) correctly in right trunk wheel arch panel (2) and close.

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: