Removing and installing power distribution box (front) (Countryman 2017-2023, except PHEV)

Preliminary work needed: 

• Remove TRIM FOR DASHBOARD AT BOTTOM RIGHT .
• Remove right glove compartment with housing

Removal: 

Remove screw (1).

Feed out power distribution box (2) from support (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Feed in power distribution box (2) into support (3).

Tighten screw (1).

Tightening torque 61 14 3AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install right glove compartment with housing
• Install BOTTOM RIGHT INSTRUMENT PANEL TRIM .