37 14 512 Replacing rear ride height sensor (Countryman 2017-2023, except PHEV)

Removal: 

Disconnect plug connection (1).

Slacken nut (4).

Detach the jointed rod on the lever of the sensor.

Release screw (2).

Remove ride height sensor (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew the screws (1).

Take off holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Position holder (2) on ride height sensor.

Tighten down screws (1).

Tightening torque 37 14 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Position ride height sensor (3) with holder on rear axle support.

Tighten screw (2).

Tightening torque 37 14 3AZ .

Connect plug connection (1).

Attach the jointed rod on the lever of the sensor.

Tighten nut (4).

Tightening torque 37 14 4AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Check HEADLIGHT ADJUSTMENT , correct if necessary.