Installing the rear heat shield
- Feed in and install the heat shield (4).
- Tighten screws (arrows).TIGHTENING TORQUE SPECIFICATIONS
Heat shield to body screw Tightening torque 2.6Nm Nut
Replace nut.Tightening torque 2.6Nm - Tighten nuts (3).TIGHTENING TORQUE SPECIFICATIONS
Heat shield to body screw Tightening torque 2.6Nm Nut
Replace nut.Tightening torque 2.6Nm - Insert and install the holder (2).
- Tighten down screws (1).TIGHTENING TORQUE SPECIFICATIONS
Heat shield to body screw Tightening torque 2.6Nm Nut
Replace nut.Tightening torque 2.6Nm