5116 Center Console, Cup Holder
5116 TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening torque | |
|---|---|---|---|
| 1AZ Front center console to center stack trim | F56/F55/F54/F57 | 2 Nm | |
| 2AZ Vehicle exterior mirror to front door | F56/F55/F57/F60 | M6x50 | 8 Nm |
| 3AZ Holder, center console center to body (nuts) | F56/F55 | 8 Nm | |
| 4AZ Center armrest to holder | F56/F55/F57 | M8x25 | 19 Nm |
| F54 | 8 Nm | ||
| 5AZ Holder for rear center console | F56/F55/F54 | 19 Nm | |
| 6AZ Center console to holder | F56/F55/F57 | 4.5 Nm | |
| 7AZ Center console | F54/F60 | 2 Nm | |
| 8AZ Center armrest storage compartment | F54/F60 | 3 Nm | |
| 9AZ Cup holder on basic carrier | F54 | 2 Nm | |
| 10AZ Center console to central holder | F54/F60 | screw | 10 Nm |
| 11AZ Glove compartment, top | F54/F60 | screw | 1.8 Nm |
| 12AZ Glove compartment, bottom | F54/F60 | screw | 2.4 Nm |
| 13AZ Air duct to glove compartment | F54 | screw | 1.8 Nm |
| 14AZ Sun visor | F57 | screw | 1.5 Nm |
| 15AZ Sun visor counter bearing | F57 | screw | 3 Nm |