Installing the front right wheel arch cover
NOTE:
Description is for left component only. Procedure on the right side is identical.
Installing the front wheel arch cover
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Guide the front wheel arch cover (5) in.
- Tighten down screws (1) and (2).TIGHTENING TORQUES SPECIFICATION
Wheel arch cover screw Tightening torque 2.6 Nm Plastic nut Tightening torque 2.6 Nm - Tighten nut (3).TIGHTENING TORQUES SPECIFICATION
Wheel arch cover screw Tightening torque 2.6 Nm Plastic nut Tightening torque 2.6 Nm - Secure the clip (4).