5145 Trim Panel, Instrument Panel
5145 TRIM PANEL, INSTRUMENT PANEL - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Instrument panel trim to carrier support | F56/F55/F54/F57/F60 | Oval-head screw for plastic | 1.8 Nm | |
| Oval-head self-tapping screw | 2.4 Nm | |||
| 2AZ Support for dashboard on bulkhead (in engine compartment) | F56/F55/F54/F57/F60 | 21 Nm | ||
| 3AZ Retaining bracket to tunnel/support | F56/F55/F54/F57/F60 | 21 Nm | ||
| 4AZ Support for dashboard to A-pillar | F56/F55/F54/F57/F60 | 21 Nm | ||
| 5AZ Support for dashboard to cowl cross-member | F56/F55/F54/F57/F60 | 21 Nm | ||
| 6AZ Heating and air conditioning unit on support | F56/F55/F54/F57/F60 | Replace screws | 8 Nm | |
| 7AZ Air duct on support | F60 | 2.4 Nm |
5145 TIGHTENING TORQUE OVERVIEW
| Bottom trim panel to bracket | ||
| Screw | Tightening torque | 2.4 Nm |