1111 ENIGINE BLOCK TECHNICAL DATA (Cooper base 4-door hatchback)
1111 TECHNICAL DATA OVERVIEW
| Cylinder bore B36/B38/B42/B46/B48/B58 | |
| Diameter of cylinder bore | |
| 82.000 mm... 82.014 mm | |
| Permitted irregularity of the cylinder bore | |
| 0.01 mm | |
| Permitted conicity of the cylinder bore | |
| 0.01 mm | |
| Permissible total wear tolerance between piston and cylinder bore (engine operated) | |
| 0.15 mm |
1111 ENIGINE BLOCK (CRANKCASE) W10 / COOPER B16 - TECHNICAL DATA SPECIFICATION
| Bore dia. | mm | 76.992...77.008 |
| Permitted out-of-round of cylinder bore a) | mm | 0.0076 |
| Permitted conicity of cylinder bore a) | mm | 0.051 |
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.100 |
a) new condition
1111 ENIGINE BLOCK (CRANKCASE) W10 / MINI ONE B16 - TECHNICAL DATA SPECIFICATION
| Bore dia. | mm | 76.992...77.008 |
| Permitted out-of-round of cylinder bore a) | mm | 0.0076 |
| Permitted conicity of cylinder bore a) | mm | 0.051 |
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.100 |
a) new condition