65 77 532 Removing and installing/replacing front left sensor (US version only) - V.3 (Countryman 2017-2023, except PHEV)

Preliminary work needed: 

• DISCONNECT cable from battery earth lead
• Remove the FRONT LEFT HEADLIGHTS .

Removal: 

Unfasten plug connection (1) and disconnect.

Release screw (2) and remove sensor.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Correctly position the sensor and tighten the screw (2).

Tightening torque 65 77 2AZ .

Connect and lock plug connection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install the FRONT LEFT HEADLIGHTS .
• Connect BATTERY GROUND LEAD .