61 62 100 Adjusting the spray nozzle for rear window washer system (Countryman JCW ALL4 AWD)
NOTE:
Rear wiper must be in rest position.
Mark the contact point (1) with adhesive tape (A=55 mm/B=490 mm).
Operate the rear window washer system.
The spray jet must hit the mark.
If necessary, adjust the spray nozzle (3).
Attention!
Do not insert pointy objects into the spray nozzle (3) (risk of damage).
Open protective cap (2).
Use a suitable tool to adjust the spray nozzle (3) until the spray jet hits the mark.
If applicable, remove adhesive residue from the rear window.
Fill up with washer fluid.