New universal crimping die All
All
Situation: The variety of contacts and therefore also the various crimping types always require a new crimping tool. To save costs, a universal crimping die was developed. This universal crimping die can crimp a large number of contacts fitted in the vehicles. The wire cross section can vary between 0.35 and 2.5 mm2 . Specifications for crimping the individual contacts are always met.
The new universal crimping die is used in conjunction with the special tool 61 4 321 (handle without crimping die) and stored in the special tool case 61 4 320.
Enclosure 1: Setup and storage location of the universal crimping die
Enclosure 2: General information about use of the special tool
Procedure: Offer tools will be sent to every dealer with a tools agreement.