New release tool for electrical contacts MINI

Situation:  The release tool set 61 0 400 for N12 and N14 engines was presented in Service Information bulletin 02 08 06 312. This set has been extended by a new release tool. This release tool is used to unlock ("sensortimer") contacts correctly from the connector housing.

It can be stored in special tools case 61 0 300 (since 09/2005) or in special tool case 61 1 150 (old version supplied until 09/2005).

Enclosure 1: Description and use of new release tool

Procedure:  Release tools are part of the minimum requirement of special tools and are sent to every MINI authorized dealer with a tools agreement.