Releasing the mounted parts from the front axle support

Only on right side: Release the screws (3) and remove the holder for the washer fluid reservoir (2) .
NOTE: Perform the steps on the right and left side.
Loosen screws (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.
Unlock the fuse (1) of the lock (2) from the holder for the charge air cooler.
Fully remove the lock (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Release the bolt (2) of the engine support (3) on the front axle (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.
Loosen screws (1) .

Courtesy of BMW OF NORTH AMERICA, INC.