Install the trunk lid spindle drive

CAUTION: Shutting hood or trunk lid .
Injury hazard!

Support hood/trunk lid in fully open position with the aid of a suitable device.

Mount the spindle drive (2) at both top and bottom on the ball head and engage the lock (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Connect the connector (1) to the spindle drive (2) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the grommet (1) from the spindle drive (2) into the body panel (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to WHEN REPLACING THE SPINDLE DRIVE .