Install the soft-close motor on the trunk lid

• Clip the soft-close motor (4) into the holders (3).
• Attach the cable (2) in the guides and on the tailgate lock.
• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALL THE LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL (WITH OPTIONAL EQUIPMENT ADJUSTABLE REAR SEAT BENCH) .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to INSTALL TRIM PANEL FOR STORAGE SHELF (PARCEL SHELF) .