Removing and installing battery cover (Countryman 2017-2023, except PHEV)

Removal: 

Partially detach seal (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen cap nuts (1).

Open locks (2) by turning them anti-clockwise.

Remove windshield panel cover (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew the screws (1).

Remove battery cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Thread in the battery cover (2).

Tighten down screws (1).

Tightening torque 61 21 6AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Thread in the windshield panel cover (3).

Turn the locks (2) to the right until the stop is reached.

Tighten cap nuts (1).

Tightening torque 61 21 6AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Join gasket (1).

Courtesy of BMW OF NORTH AMERICA, INC.