61 12 013 Replacing the battery ground lead (Countryman 2017-2023, except PHEV)
WARNING:
Observe safety instructions for handling vehicle battery. Refer to NOTES ON AGM BATTERY (COUNTRYMAN 2017-2023, EXCEPT PHEV) and SAFETY INSTRUCTIONS FOR HANDLING VEHICLE BATTERY REP-ALG-RAE5261-SICHHNWS - V.13 (Countryman 2017-2023, except PHEV) .
Follow the notes for DISCONNECTING AND CONNECTING THE VEHICLE BATTERY .
Follow instructions on INTELLIGENT BATTERY SENSOR (IBS).
Follow the notes for DISCONNECTING AND CONNECTING THE VEHICLE BATTERY .
Follow instructions on INTELLIGENT BATTERY SENSOR (IBS).
Preliminary work needed:
Removal:
Release expanding rivet.
Remove the mounting for the gasket (1).
Loosen nut (1).
Unlock and disconnect connector (3).
Remove battery ground lead (2) from the vehicle battery.
Slacken nut (1).
Remove the battery ground lead (2).
Installation:
Join battery ground lead (2).
Tighten nut (1).
Tightening torque 61 21 2AZ .
Join battery ground lead (2) on the vehicle battery.
Tighten nut (1).
Tightening torque 61 21 1AZ .
Connect connector (3).
Join mounting for gasket (1) and secure with expanding rivet.
Required reworking: