33 41 180 Replacing wheel bearing (hub) for rear wheel (Countryman models with FWD)

Preliminary work needed: 

• Remove the REAR WHEEL .
• Remove REAR BRAKE ROTOR .

Removal: 

Unscrew the screws (1).

Remove wheel bearing (hub).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Keep contact surfaces (1) of wheel carrier and wheel bearing (hub) clean and free from oil and grease.

Courtesy of BMW OF NORTH AMERICA, INC.

Align new wheel bearing (hub) to trailing arm.

Tighten down screws (1).

Part:  Replace screws (1).

Tightening torque, 33 41 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install REAR BRAKE DISC .
• Install REAR WHEEL .