3341 Wheel Bearings
33 41 WHEEL BEARINGS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wheel bearing to trailing arm | F54/F55/F56/F57/F60 | M12 | Joining torque and angle of rotation must be observed without fail. | |
| Replace screws. | ||||
| 1. Joining torque | 100 Nm | |||
| 2. Angle of rotation | 90° | |||
| 2AZ Wheel bearing (hub) on output shaft | F54 ALL/F60 ALL | M16 | Joining torque and angle of rotation must be observed without fail. | |
| Replace screw. | ||||
| 1. Joining torque | 210 Nm | |||
| 2. Angle of rotation | 90° |