33 52 012 Replacing rear left or right side shock absorber (Countryman 2017-2023, except PHEV)

Special tools required: 

• 2 355 965
• 2 355 966

Attention! 

• On replacement of shock absorber, replace additional absorber!
• OBSERVE THE NOTES ON SHOCK ABSORBER REPLACEMENT! .

Preliminary work needed: 

• Remove REAR SHOCK ABSORBER .

Removal: 

Remove protective cap (1).

Remove gasket (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Release the nut (1) with special tools 2 355 965 and 2 355 966.

Remove spring strut mounting (2).

Impact screwdrivers are prohibited!

Risk of damage inside the shock absorber! 

Courtesy of BMW OF NORTH AMERICA, INC.

Remove gasket (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Where applicable and if available, remount stone chip guard (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Part:  Replace auxiliary damper with protective tube (3).

Connect additional absorber with protective tube (3) onto shock absorber.

Connect gasket (2) and support bearing (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Part:  Replace nut (1).

Screw on nut (1) and tighten with special tools 2 355 965 and 2 355 966.

Tightening torque 33 52 3AZ .

Impact screwdrivers are prohibited!

Risk of damage inside the shock absorber! 

Courtesy of BMW OF NORTH AMERICA, INC.

Check protective cap (1) for damage.

Part:  Replace protective cap (1) if necessary.

Mount protective cap (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install REAR SHOCK ABSORBER .