31 35 005 Removing and installing anti-roll bar link for left or right anti-roll bar (Countryman 2017-2023, except PHEV)

Preliminary work needed: 

• Remove FRONT WHEEL .

Removal: 

Release nuts (1); if necessary, grip at inner Torx socket.

Remove anti-roll bar link (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Insert anti-roll bar link (2) on anti-roll bar and spring strut.

Part:  Replace nuts (1).

Tighten nuts (1), if required counter support at Torx socket.

Tightening torque 31 35 1/2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install FRONT WHEEL .