41 14 531 REPLACING ENGINE MOUNT/FRONT LEFT SIDE FRAME CONNECTION (FRONT LEFT WHEEL ARCH REMOVED) REP-REP-RAF4541-4114531 - V.6 (Countryman 2017-2023, except PHEV)

Observe procedure for REPAIR STAGE 3 .

Read contents of BODY, GENERAL .

Spot-weld bonding is used on this vehicle. Observe specific PROCEDURE .

For stripping and rebuilding operations, see the surrounding texts on KSD CD (FRU number 41 14 531).

The following new parts are required (see Electronic Parts Catalog):

• (1) Connection, wheel arch/entrance

Courtesy of BMW OF NORTH AMERICA, INC.

Removal 

Open welded connections in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Open welded connections in areas (1) and remove connection between the engine mount and side frame.

Courtesy of BMW OF NORTH AMERICA, INC.

New part preparation 

Fit in new part.

Installation 

Install new part and weld in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Weld new part in the areas (1).

Courtesy of BMW OF NORTH AMERICA, INC.