41 12 190 REPLACING LEFT TRUNK BASE REP-REP-RAF6041-4112190 - V.2 (Countryman 2017-2023, except PHEV)

Read contents of BODY, GENERAL .

Procedure OBSERVE  repair stage 2!

For stripping and rebuilding operations, refer to surrounding texts on KSD (FRU number 41 12 190).

Following new body parts are required (see Electronic Parts Catalog):

1. Luggage compartment floor, left section
2. Rear left wheel arch extension

Courtesy of BMW OF NORTH AMERICA, INC.

Removal 

Open welded connections in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Mark the severance cut (1) according to the schematic diagram and cut.

Open welded connections in area (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Open welded connections in area (1).

Remove luggage compartment floor.

Courtesy of BMW OF NORTH AMERICA, INC.

New part preparation 

Mark severance cut on new part in accordance with severance cut on vehicle + 15 mm for extra material and cut.

Adjust new parts and prepare for joining through welding.

Installation 

Install new parts and weld in areas (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Weld new parts in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Weld new parts in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.