5171 Gaskets And Loose Body Parts
5171 TIGHTENING TORQUE OVERVIEW
| Air duct to deformation element, bottom | ||
|---|---|---|
| Tightening torque | 8 Nm | |
| Air duct to deformation element/cross connection | ||
| M6x20 screw | Tightening torque | 6 Nm |
| Air flap control to support | ||
| M6x20 screw | Tightening torque | 6 Nm |
| Attach rear spoiler | ||
| Torx screw M6 | Tightening torque | 3.1 Nm |
| Battery cover to tension strut/trim panel | ||
| Tightening torque | 2.8 Nm | |
| Brake ventilation duct to holder | ||
| screw | Tightening torque | 4 Nm |
| Bumper cover to front panel | ||
| M6x20 screw | Tightening torque | 6 Nm |
| Cover on body | ||
| Hexagon screw | Tightening torque | 3 Nm |
| Cowl cover, top | ||
| screw | Tightening torque | 2.6 Nm |
| Lower front bumper panel | ||
| screw | Tightening torque | 3 Nm |
| Rear bulkhead to cowl lower part | ||
| Oval-head screw | Tightening torque | 5 Nm |
| Side sill trim panel | ||
| screw | Tightening torque | 3 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Tension strut to battery tray | ||
| M8 | Tightening torque | 19 Nm |
| Wheel arch cover | ||
| screw | Tightening torque | 2.6 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Wheel arch cover | ||
| screw | Tightening torque | 3 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Wheel arch trim panel to bumper panel | ||
| Screw | Tightening torque | 2.5 Nm |