Remove the spindle drive of the trunk lid

CAUTION: Shutting hood or trunk lid .
Injury hazard!

Support hood/trunk lid in fully open position with the aid of a suitable device.

Remove the grommet (1) of the spindle drive (2) from the body panel (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock and disconnect the plug connection (1) from the spindle drive (2) outside the body.

Courtesy of BMW OF NORTH AMERICA, INC.
Open the top and bottom locks (1) and take out and remove the spindle drive (2) each time.

Courtesy of BMW OF NORTH AMERICA, INC.