Install the lower right deformation element

• Insert the deformation element (4).
• Tighten down screws (3).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Deformation element to front axle support adapter
  screw
  	Tightening torque	11.8Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Vertical strut to deformation element
  Flat-head screw M6x20
  	Tightening torque	11.8Nm
  Hexagon screw
  	Tightening torque	11.8Nm

• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Air duct to deformation element, bottom
  	8Nm

• Insert the washer fluid reservoir (2) in the holder (3).
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Washer fluid reservoir
  	tightening torque	8Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SUPPORT FOR THE FRONT BUMPER COVER AT THE BOTTOM .