- Position the bumper cover (1) with the help of another person,
- Connect all associated connectors.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Underbody protection |
| screw |
|
|
| |
Tightening torque |
3Nm |
TIGHTENING TORQUE SPECIFICATIONS
| Wheel arch cover |
| screw |
|
| |
3Nm |
| Plastic nut |
|
| |
2.6Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|
NOTE:
Perform the steps on the right and left side.
- Tighten down screw (2).
TIGHTENING TORQUE SPECIFICATIONS
| Bumper cover to holder at side |
| screw |
|
| |
6Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Clip the wheel arch trim (1) in on the side.
NOTE:
Perform the steps on the right and left side.
- Secure expanding rivet (1).
- Tighten the screws (2).
TIGHTENING TORQUE SPECIFICATIONS
| Wheel arch cover |
| screw |
|
| |
3Nm |
| Plastic nut |
|
| |
2.6Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Tighten screws (1) and, if necessary, screws (2).
TIGHTENING TORQUE SPECIFICATIONS
| Front radiator grill to air duct |
| screw |
|
| |
4.6Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|