51 21 090 Removing and installing/replacing door lock in left or right front door (Countryman 2017-2023, except PHEV)
Preliminary work needed:
- Remove the outer door handle support. Refer to 51 21 125 Removing and installing/replacing the exterior door handle support including lock cylinder, left or right (Countryman 2017-2023, except PHEV) and 51 21 126 REMOVING AND INSTALLING/REPLACING SUPPORT FOR LEFT OR RIGHT OUTER DOOR HANDLE WITHOUT LOCK CYLINDER (Countryman 2017-2023, except PHEV) .
Removal:
IMPORTANT:
Do not damage the door lock gasket during removal.
Unclip locking rod (1).
Unfasten plug connection (3) and disconnect.
Unscrew the screws (2).
Replacement:
Remount Bowden cable (1).
Installation:
Tighten screws (1) first. Then tighten screw (2) of door lock.
Tightening torque 51 21 1AZ .
Clip in locking rod (3).
Connect plug connection (4).
Required reworking:
- Install the outer door handle support. Refer to 51 21 125 Removing and installing/replacing the exterior door handle support including lock cylinder, left or right (Countryman 2017-2023, except PHEV) and 51 21 126 REMOVING AND INSTALLING/REPLACING SUPPORT FOR LEFT OR RIGHT OUTER DOOR HANDLE WITHOUT LOCK CYLINDER (Countryman 2017-2023, except PHEV) .