Installing the amplifier
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION
- Attach the holder (2) with the amplifier to the stud bolt (3).
- Tighten nuts (1).TIGHTENING TORQUE SPECIFICATIONS
Audio amplifier holder to body Nut M6 5Nm - Connect connectors (1) and lock.
Follow-up work
- Refer to INSTALLING THE LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL (WITH OPTIONAL EQUIPMENT ADJUSTABLE REAR SEAT BENCH) .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING TRIM PANEL FOR STORAGE SHELF (PARCEL SHELF) .
- Refer to CONNECTING THE NEGATIVE BATTERY CABLE OF THE SYSTEM BATTERY .
- Refer to INSTALLING FRONT WINDSHIELD PANEL COVER .
- Refer to INSTALLING THE FRONT HOOD SEAL AT THE REAR .