Install the bulb socket for the tail light

CAUTION: Danger through light source.
Injury hazard! Risk of short circuits!

Disconnect light source from voltage supply before replacing: Switch off lighting system and ignition.
For additional information see: 63 99 INFORMATION ON HANDLING BULBS/LIGHT SOURCES (EXTERIOR LIGHTING)

Insert the bulbs (1) into the bulb socket (2) and lock them by slightly applying clockwise pressure.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the bulb socket (2) into the tail light and clip into the detents (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Connect and lock the connector (1) to the tail light.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work