Installing the right tail light

NOTE: Description is for left component only. Procedure on the right side is identical.

Connect and lock the connector (1) to the tail light (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Join the tail light (2) in the arrow direction.
Tighten the nuts (1) on the tail light (2).

TIGHTENING TORQUE SPECIFICATIONS

Tail lamp
Nut M6, self-locking		2.8Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Check the detents (1) of the cover (2) for the water channel for damage.
If necessary, replace the cover (2) for the water channel.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the water channel cover (1) at the bottom and clip it in forward.

Courtesy of BMW OF NORTH AMERICA, INC.
Lock the twistlocks (1) of the tail light (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work