65 24 020 Removing and installing/replacing blocking circuit - V.1 (Countryman 2017-2023, except PHEV)

Preliminary work needed: 

• Remove TAILGATE TRIM PANEL .

Removal: 

Unlock plug connections (1) and disconnect.

Remove screw (2).

Remove blocking circuit (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Mount the band elimination circuit (3).

Tighten screw (2).

Tightening torque 65 24 2AZ .

Connect and lock the plug connections (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Mount the TAILGATE TRIM PANEL .