66 33 010 Remove and install/replace the ultrasonic sensors for the Parking Maneuvering Assistant (Countryman 2017-2023, except PHEV)

Preliminary work needed: 

• Partially remove WHEEL ARCH COVER, FRONT LEFT OR RIGHT .

Removal: 

Unfasten plug connection (1) and disconnect.

Unlock the detents at the detents (arrow).

Pull ultrasonic sensor (2) out of holder.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Engage the ultrasonic sensor (2) at the detents (arrow).

Connect and lock plug connection (1).

Required reworking: 

• Install the FRONT LEFT OR RIGHT WHEEL ARCH COVER .

Courtesy of BMW OF NORTH AMERICA, INC.