Remove the rear view camera (RFK)
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: 61 35... NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION .
Preliminary work
- Refer to REMOVING THE POWER TAILGATE SWITCH .
- Refer to REMOVING THE TRIM FOR THE TOP REAR WINDOW FRAME .
- Refer to REMOVING BOTH TRIM PIECES FOR THE REAR WINDOW FRAME .
- Refer to REMOVING TAILGATE TRIM PANEL .
- Refer to REMOVING THE TRUNK LID HANDLE .
- Loosen screws (1).
- Remove the rear view camera (RFK) (2) from the trunk lid handle (3).