84 31 550 Removing and installing/replacing hands-free microphone, driver's side (Countryman 2017-2023, except PHEV)
Special tools required:
- 00 9 340
Removal:
Lever off microphone cover (1) from headlining (2) with special tool 00 9 340.
Feed out microphone cover (1) and disconnect associated connector.
Replacement only:
Remount the microphone (1) on the trim (2).
NOTE:
Make sure the microphone (1) is correctly fitted in the trim (2).
Note the direction of installation of the microphone (1).
Note the direction of installation of the microphone (1).
Installation:
Connect connector.
Join microphone cover (1) in headlining (2).
NOTE:
Make sure connector is properly locked.
Make sure microphone cover (1) is correctly fitted in headlining (2).
Make sure microphone cover (1) is correctly fitted in headlining (2).