Removing and installing power distribution box (front) (Cooper 4-door hatchback and 2-door hatchback, 2020-2023)

WARNING: Observe safety instructions for handling vehicle battery. Refer to NOTES ON AGM BATTERY (COOPER 4-DOOR HATCHBACK AND 2-DOOR HATCHBACK, 2020-2023) and SAFETY INSTRUCTIONS FOR HANDLING VEHICLE BATTERY REP-ALG-RAE5261-SICHHNWS - V.13 (COOPER 4-DOOR HATCHBACK AND 2-DOOR HATCHBACK, 2020-2023) .

Preliminary work needed:

Removal:

Remove screw (1).

Feed out power distribution box (2) from support (3).

G11789488

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Feed in power distribution box (2) into support (3).

Tighten screw (1).

Tightening torque 61 14 3AZ .

G11789488

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install RIGHT GLOVE COMPARTMENT WITH HOUSING .
Install BOTTOM RIGHT INSTRUMENT PANEL TRIM .