Installing front left and right wheel arch trim

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing the front wheel arch trim

Check the sheet metal nut (1) for damage and replace as required.
Check the clips (2) for damage and replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Carefully insert the front wheel arch trim (1) on the door sill trim panel and install it. Pull the door sill trim panel slightly outwards.
Clip in the wheel arch trim (1) at the clips (3).
Engage the wheel arch trim (1) on the detents (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screw (1).

TIGHTENING TORQUES SPECIFICATION

Wheel arch trim to the side panel
Hexagon screw	tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.