Front Brake, MINI, F55
|
IMPORTANT:
New brake pads may only be installed if the brake disk thickness is greater than the minimum brake disc thickness.
Minimum brake disc thickness during general inspection (Gl): Nominal size thickness minus 2.4 mm (Not applicable to perforated brake discs) Perforated brake discs: Nominal size thickness minus 1.6 mm Depending on:
different brake discs can be fitted The brake discs must always be identified by the relevant vehicle identification number and the applicable BMW parts catalogue! |
||
| Thickness difference in the friction surfaces of the brake disc | Max. mm | 0.01 |
| Nominal size (diameter x thickness) | mm | 280x22 |
| Nominal size (diameter x thickness) | mm | 294x22 |
| Minimum brake disc thickness stamped on brake disc chamber | mm | 20.4 |
| Pad wear warning from remaining brake pad thickness | mm | 3.7 |