Connect battery ground lead
- Connect the connector (3) to the IBS and lock it audibly.
- Mount battery ground lead (2) on the negative battery terminal.
- Tighten nut (1)
.TIGHTENING TORQUE SPECIFICATIONS
Battery terminal clamp on battery terminal M6 Tightening torque 5 Nm - Feed in cowl cover (3).
- Turn locks (2) clockwise up to stop.
- Tighten down cap nuts (1)
.TIGHTENING TORQUE SPECIFICATIONS
Fairing panel cover Tightening torque 2.8 Nm - Mount gasket (1)
.