51 47 151 Removing and installing/replacing left trunk wheel arch trim (Cooper 4-door hatchback models, 2020-2023)

Preliminary work needed: 

• Remove COVER FROM TAIL PANEL .

REMOVAL: 

Remove covers (1), release screw underneath and remove lashing points.

Detach cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove trim (2) and holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Release expanding rivet (1).

Feed out and remove trunk wheel arch panel.

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION: 

Feed in trunk wheel arch panel.

Mount expanding rivets (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Install trim (2) and holder (3).

Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Install lashing points and tighten screws.

Tightening torque 51 71 2AZ .

Mount covers (1).

Mount cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install COVER ON TAIL PANEL .