51 47 151 Removing and installing/replacing left trunk wheel arch trim (Cooper 2-door hatchback models 2020-2023, except JCW GP)

Preliminary work needed: 

• Remove COVER ON REAR END PLATE .

REMOVAL: 

Detach cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cover (1) and release bolt underneath.

Release screw (2) and remove cover (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cover (1) and release bolt underneath.

Remove lashing point.

Release expanding rivet (2).

Feed out and remove trunk wheel arch panel.

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION: 

Feed in trunk wheel arch panel.

Mount expanding rivets (2).

Position lashing point, tighten bolt and mount cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Position cover (3).

Tighten bolt and mount cover (1).

Tighten screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Mount cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install COVER ON TAIL PANEL .