51 11 761 Remove and install/replace deformation element for front right bumper (Cooper 4-door hatchback and Cooper 2-door hatchback 2020-2023, except EV)
Preliminary work needed:
- Removing SUPPORT FOR TOPPING FRONT BUMPER COVER .
- Release WASHER FLUID RESERVOIR FOR WASHER SYSTEM .
Removal:
Remove screws (1 to 4).
Pull out deformation element (5).
Installation:
Insert deformation element (5).
Tighten screws (1 to 4).
| Screw | Tightening torque |
|---|---|
| (1) | 51 11 4AZ . |
| (2) | 51 11 6AZ . |
| (3) | 51 11 4AZ . |
| (4) | 51 11 9AZ . |
Required follow-up work:
- Secure WASHER FLUID RESERVOIR FOR WASHER SYSTEM .
- Install front top SUPPORT FOR BUMPER COVER .