63 13 200 Removing and installing/replacing front left or right auxiliary turn signal lamps (Cooper 4-door hatchback and Cooper 2-door hatchback, 2020-2023)
Special tools required:
- 00 9 325
WARNING:
Follow instructions for handling light bulbs (EXTERIOR LIGHTING) .
Removal:
Raise the hood.
Release detent of auxiliary turn signal lamp (1) at rear of side panel with special tool 00 9 325 .
Remove auxiliary turn signal lamp (2) from side panel.
Unlock and disconnect associated connector.
Installation:
NOTE:
Guides and clamp on auxiliary turn signal lamp (1) must not be missing or damaged.
Connect associated connector.
Position auxiliary turn signal lamp (1) at side panel (2) and engage.