34 11 280 Removing and installing/replacing front left protective plate (Cooper 4-door hatchback and Cooper 2-door hatchback, 2020-2023)

Preliminary work needed: 

• REMOVE FRONT BRAKE ROTOR .

Removal: 

Release screws (1) and remove brake guard plate (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Mounting the brake guard plate (2).

Insert screws (1) and tighten.

Tightening torque 34 11 4AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Installing the front ROTOR .