LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2021 >> Cooper Base, 4D Hatchback, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sunroof -- Repair Cooper (F55 & F56) >> 54 13 Sunroof Assembly >> Notes on panorama glass roof (initialization/standardization/learning of characteristic curve) (Cooper 4-door hatchback and Cooper 2-door hatchback, 2020-2023)

Notes on panorama glass roof (initialization/standardization/learning of characteristic curve) (Cooper 4-door hatchback and Cooper 2-door hatchback, 2020-2023)

Initialization  comprises:

The mechanical end positions are recorded and stored during standardization.

The characteristic curve is learned immediately after standardization.

When the characteristic curve is learned, the mechanical closing forces of the panorama glass roof are recorded and stored for correct operation of the crush guard.

Then carry out initialization: 

WARNING: There is no crush guard during initialization.
Ensure adequate voltage supply during initialization.
If necessary, recharge battery.

Calibration: 

G13825065Courtesy of BMW OF NORTH AMERICA, INC.

Learning characteristic curve: 

NOTE:
  • The entire process takes approx. 30 sec.
  • Learning the characteristic curve is completed when the switch is released
  • If the switch is released in the meantime, the entire procedure must be repeated
  • On successful completion of initialization, the corresponding check control messages extinguish
  • Carry out functional check (one-touch mode, anti-trapping protection and, if necessary, comfort function)