52 13 101 Replacing the Bowden cable of the right seat rail (Cooper 2-door hatchback models, 2020-2023)
NOTE:
Carry out work on the right side in the same way as for the left side illustrated here.
Preliminary work needed:
- Remove front seat driver's seat
- Remove OUTER COVER ON FRONT SEAT .
Removal:
Release screw (1) on seat (4).
Guide the Bowden cable with adjustment mechanism (2) out of the backrest adjustment (3).
Unclip the Bowden cable (1) in the marked area.
Installation:
Clip in the Bowden cable (1) in the marked area.
Position Bowden cable with adjustment mechanism (2) on backrest adjustment (3).
Tighten screw (1) on seat (4).
Required follow-up work:
- Install OUTER COVER ON FRONT SEAT .
- Install front seat driver's side