51 12 050 Removing and installing/replacing support for rear bumper panel (Cooper 4-door hatchback and Cooper 2-door hatchback, 2020-2023)

Preliminary work needed: 

• Remove BUMPER COVER .

Removal: 

Slacken nuts (1) and remove support (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Position support (2) and secure with nuts (1).

Tightening torque 51 12 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install BUMPER COVER .