41 14 531 Replacing Engine Mount/Front Left Side Frame Connection (Front Left Wheel Arch Removed). Rep-Rep-RAF5641-4114531 - V.5 (Cooper 4-Door Hatchback And 2-Door Hatchback, 2020-2023)

Observe procedure for REPAIR STAGE 3 .

Read contents of BODY, GENERAL .

Spot-weld bonding is used on this vehicle. Observe specific PROCEDURE .

For stripping and rigging operations, refer to texts on KSD CD (job number 41 14 531).

Following new body parts are required (see Electronic Parts Catalog):

1. Connection, wheel arch/entrance

Courtesy of BMW OF NORTH AMERICA, INC.

Removal: 

Open welded connections in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Open welded connections in areas (1) and remove connection between the engine mount and side frame.

Courtesy of BMW OF NORTH AMERICA, INC.

Preparation of new part: 

Fit in new part.

Installation: 

Install new part and weld in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Weld new part in the areas (1).

Courtesy of BMW OF NORTH AMERICA, INC.